home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-19 / amate270.zip / AUTOMATE.DOC < prev    next >
Text File  |  1992-05-06  |  51KB  |  1,321 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.  
  21.  
  22.  
  23.  
  24.  
  25.  
  26.                          ___________________________
  27.  
  28.                               A U T O - M A T E
  29.                                  Version 2.7
  30.                          ___________________________
  31.  
  32.  
  33.  
  34.  
  35.  
  36.  
  37.  
  38.  
  39.  
  40.  
  41.  
  42.  
  43.  
  44.  
  45.  
  46.  
  47.  
  48.                                Kurtis J. Jones
  49.                              1748 North Oakland
  50.                            Fayetteville, AR  72703
  51.  
  52.                                  6 May 1992
  53.  
  54.  
  55.  
  56.  
  57.  
  58.  
  59.  
  60.                   Copyright (c) 1990-1992 by -Mate Software
  61.  
  62.  
  63.  
  64.  
  65.  
  66.  
  67.  
  68.  
  69.                        A U T O - M A T E   Version 2.7
  70.                   Copyright (c) 1990-1992 by -Mate Software
  71.                   _________________________________________
  72.  
  73.           Unmodified copies   of   this   program   and   the   accompanying
  74.      documentation may be made and distributed freely without charge.  Under
  75.      no circumstances  shall this program or the accompanying  documentation
  76.      be distributed  as  part  of  any for-profit venture, without expressed
  77.      written permission from the author.
  78.  
  79.           AUTO-MATE is distributed as  shareware.  If you find this software
  80.      has any value to you, or if you use this software on  a  regular basis,
  81.      please register  your copy of AUTO-MATE by completing the order form at
  82.      the end of this documentation.
  83.  
  84.      Please address  any questions or  comments  you  may  have  about  this
  85.      software to:
  86.  
  87.           Kurtis J. Jones
  88.           1748 North Oakland
  89.           Fayetteville, AR  72703
  90.  
  91.      I may also be reached via THE SPECTRUM BBS (501) 521-5639.   All first-
  92.      time callers  to  THE  SPECTRUM  BBS  are  given  full  upload/download
  93.      privileges.
  94.  
  95.  
  96.  
  97.  
  98.  
  99.  
  100.  
  101.  
  102.  
  103.  
  104.  
  105.  
  106.  
  107.  
  108.  
  109.  
  110.  
  111.  
  112.  
  113.  
  114.  
  115.  
  116.  
  117.  
  118.  
  119.  
  120.  
  121.      DISCLAIMER OF WARRANTY:
  122.  
  123.      THIS SOFTWARE AND MANUAL ARE PROVIDED  "AS  IS" WITHOUT WARRANTY OF ANY
  124.      KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT  LIMITED  TO, THE
  125.      IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PURPOSE.  THE USER
  126.      OF THIS SOFTWARE AND MANUAL ASSUMES ALL RISKS.
  127.  
  128.  
  129.  
  130.  
  131.  
  132.  
  133.  
  134.  
  135.      TABLE OF CONTENTS:
  136.      __________________
  137.  
  138.      Description                                                  Page
  139.      -----------                                                  ----
  140.  
  141.      Introduction ...............................................   1
  142.      Limited Evaluation Version .................................   1
  143.      License Information ........................................   1
  144.      Changes in version 2.0+ ....................................   2
  145.      Included Files .............................................   3
  146.      Summary of Functions .......................................   3
  147.      Updating AUTO-MATE .........................................   3
  148.      Setup and Configuration ....................................   4
  149.      Sorting Options ............................................   5
  150.      The AUTO-MATE Log File .....................................   5
  151.      Running Alternate CAD Programs .............................   6
  152.      Running AUTO-MATE with SHROOM  .............................   7
  153.      Automatic Installation .....................................   7
  154.      Running AUTO-MATE ..........................................   8
  155.      Mouse Conventions ..........................................   8
  156.      Using AUTO-MATE in Shell Mode ..............................   9
  157.      Running AutoCAD ............................................  10
  158.      Plotting a Drawing .........................................  10
  159.      AutoCAD Configurations .....................................  10
  160.      Moving Around inside AUTO-MATE .............................  11
  161.      Adding File Descriptions ...................................  11
  162.      Printer Output .............................................  12
  163.      Renaming Drawing Files .....................................  12
  164.      Tagging Drawing Files ......................................  13
  165.      Moving Drawing Files .......................................  13
  166.      Deleting Drawing Files .....................................  13
  167.      Copying Drawing Files ......................................  13
  168.      Compressing Drawing Files ..................................  14
  169.      Locating a Drawing File ....................................  14
  170.      Shelling to DOS ............................................  15
  171.      Exiting AUTO-MATE ..........................................  15
  172.      Sample Installation Setups .................................  16
  173.      Registration Form ..........................................  17
  174.  
  175.  
  176.  
  177.  
  178.  
  179.  
  180.  
  181.  
  182.  
  183.  
  184.  
  185.  
  186.  
  187.  
  188.  
  189.  
  190.  
  191.  
  192.  
  193.  
  194.  
  195.  
  196.  
  197.  
  198.  
  199.  
  200.  
  201.      INTRODUCTION:
  202.      _____________
  203.  
  204.           AUTO-MATE is  a  menu/file management system which allows the user
  205.      to select an AutoCAD drawing file  from a menu and run AutoCAD with the
  206.      selected drawing file automatically.  AUTO-MATE will  also  work  as  a
  207.      front end  for  several  other CAD packages that use the ".DWG" drawing
  208.      file extension, and can be invoked  with  a  drawing  file piped at the
  209.      command line.  See the "RUNNING ALTERNATE CAD PROGRAMS" section in this
  210.      manual.
  211.           Also included  are  several  file  management functions,  and  the
  212.      ability to  add  up  to  two lines of text describing a drawing file or
  213.      directory listed by AUTO-MATE.
  214.           The latest version of AUTO-MATE  can  be  found  on  the following
  215.      BBS's:
  216.  
  217.           The Spectrum BBS  (501) 521-5639 (SysOp - Kurtis Jones)
  218.  
  219.  
  220.  
  221.      LIMITED EVALUATION VERSION:
  222.      ___________________________
  223.  
  224.           The limited evaluation version of AUTO-MATE is  denoted by a small
  225.      "e" after  the  version  number  and the words "EVALUATION COPY" in the
  226.      serial number location on the title  screen.   The  limited  version of
  227.      AUTO-MATE is identical to the full registered version of AUTO-MATE with
  228.      one exception.  The limited version of AUTO-MATE is capable of handling
  229.      only 10  drawing  files  per sub-directory, while the  full  registered
  230.      version is  capable  of  handling  up  to  525  drawing  files per sub-
  231.      directory.
  232.           A registration form is included  at  the end of this documentation
  233.      for users  who  wish  to  obtain the registered version  of  AUTO-MATE.
  234.      Please make all checks payable to "Kurtis J. Jones".
  235.  
  236.  
  237.  
  238.      LICENSE INFORMATION:
  239.      ____________________
  240.  
  241.           AUTO-MATE may be purchased in either the single user format or the
  242.      site licensed  format.   Users  who purchase the single user version of
  243.      AUTO-MATE may legally use the program  on  only one computer system per
  244.      purchased copy at a time.  Users who purchase the site licensed version
  245.      of AUTO-MATE may use the program on multiple computer  systems  at that
  246.      particular installation site.
  247.  
  248.  
  249.  
  250.  
  251.  
  252.  
  253.  
  254.  
  255.  
  256.  
  257.  
  258.  
  259.  
  260.  
  261.      A U T O - M A T E  v2.7                                  Page -1-
  262.  
  263.  
  264.  
  265.  
  266.  
  267.      CHANGES IN VERSION 2.0+:
  268.      ________________________
  269.  
  270.           Version 2.0+  of AUTO-MATE represents a complete re-working of the
  271.      program, which I hope you will find  to be a major improvement over the
  272.      previous versions of AUTO-MATE.   The  following is a brief list of the
  273.      differences between AUTO-MATE version 1.28 and AUTO-MATE  version 2.0+.
  274.  
  275.           o AUTO-MATE v2.0+ supports a Microsoft compatible mouse.
  276.  
  277.           o The  title block information database has been left out of AUTO-
  278.             MATE v2.0+.
  279.  
  280.           o The AUTO-MATE display has  been  given a complete "face-lift" in
  281.             AUTO-MATE v2.0+.
  282.  
  283.           o AUTO-MATE v2.0+ is MUCH faster than AUTO-MATE v1.28.
  284.  
  285.           o The external file security program option has  been  removed  in
  286.             AUTO-MATE v2.0+.
  287.  
  288.           o AUTO-MATE v2.0+ will work as a shell from AutoCAD.
  289.  
  290.           o The  maximum  file  description  size has been reduced from four
  291.             lines of text to two lines in AUTO-MATE v2.0+.
  292.  
  293.           o The keystroke commands have been changed to "make more since" to
  294.             the user (IE: "D" is now "DELETE", "M" is "MOVE", etc.).
  295.  
  296.           Though I've removed several potentially useful features from AUTO-
  297.      MATE, I feel that the removed features  resulted  in more problems than
  298.      benefits and  that  AUTO-MATE v2.0+ is a far superior  program  to  its
  299.      predecessor, AUTO-MATE v1.28.  I have also found that most users seldom
  300.      used the  features  that have been removed.  If, however, you feel that
  301.      you must have one or more of the  removed features, send me a note.  If
  302.      the response is great enough, I'll include one or more  of  the removed
  303.      features in the next update of AUTO-MATE.
  304.  
  305.  
  306.  
  307.  
  308.  
  309.  
  310.  
  311.  
  312.  
  313.  
  314.  
  315.  
  316.  
  317.  
  318.  
  319.  
  320.  
  321.  
  322.  
  323.  
  324.  
  325.  
  326.  
  327.      A U T O - M A T E  v2.7                                  Page -2-
  328.  
  329.  
  330.  
  331.  
  332.  
  333.      INCLUDED FILES:
  334.      _______________
  335.  
  336.           The following  files  should  be  included  in  the  archive  file
  337.      downloaded, or on the distribution diskette:
  338.  
  339.           AUTOMATE.EXE -- Main program file
  340.           AUTOMATE.DOC -- AUTO-MATE user's manual
  341.           AUTOMATE.CFG -- Sample AUTO-MATE configuration file
  342.           AUTOMATE.LOG -- Sample AUTO-MATE log file
  343.           AUTO.BAT     -- AUTO-MATE batch file
  344.           AMATECFG.EXE -- Configuration program
  345.           INSTALL.EXE  -- Installation program
  346.           README.DOC   -- Last minute changes/additional comments
  347.  
  348.  
  349.  
  350.      SUMMARY OF FUNCTIONS:
  351.      _____________________
  352.  
  353.           The following is a brief summary of AUTO-MATE's functions:
  354.  
  355.            Enter - Executes AutoCAD and  automatically loads the highlighted
  356.                       drawing file,  or  if  pressed  when  a  directory  is
  357.                       highlighted, changes  the  current  directory  to that
  358.                       directory.
  359.            Space - Begin a new AutoCAD drawing.
  360.            T -     Tags highlighted drawing file.
  361.            P -     Executes AutoCAD and plots highlighted drawing file.
  362.            I -     Prints all descriptions for the current directory.
  363.            E -     Enables a description to be added to the highlighted
  364.                       drawing file or directory.
  365.            Esc -   Exits AUTO-MATE.
  366.            G -     Logs a new directory or drive.
  367.            C -     Copy highlighted or tagged drawing file(s).
  368.            M -     Moves the highlighted or tagged drawing file(s) to
  369.                       another directory.
  370.            D -     Delete's highlighted or tagged drawing file(s).
  371.            R -     Renames the highlighted drawing file.
  372.            L -     Runs external file location program (locates file).
  373.            Z -     Runs external compression program (compresses file).
  374.            / -     Set AutoCAD configuration.
  375.            S -     Shells to DOS (type 'EXIT' to return to AUTO-MATE).
  376.  
  377.  
  378.  
  379.      UPDATING AUTO-MATE:
  380.      ___________________
  381.  
  382.           If you are currently using a version of AUTO-MATE prior to version
  383.      2.0, you  should  delete  all  files  associated  with  AUTO-MATE,  and
  384.      reinstall AUTO-MATE from scratch.  If you are updating  from  AUTO-MATE
  385.      version 2.0  or  later,  you  should  copy the following files into the
  386.      directory that you currently have AUTO-MATE installed under:
  387.  
  388.           AUTO.BAT
  389.           AUTOMATE.EXE
  390.           AMATECFG.EXE
  391.  
  392.  
  393.      A U T O - M A T E  v2.7                                  Page -3-
  394.  
  395.  
  396.  
  397.  
  398.  
  399.      After copying the new files, you should run the AUTO-MATE configuration
  400.      program, AMATECFG.EXE.   This  will  updated  your  configuration  file
  401.      (AUTOMATE.CFG) to reflect any  changes  that  have  been  made  in  the
  402.      format.
  403.           If you  use  the  AUTO-MATE  shell  mode, you must  also  add  the
  404.      following line  to  the  beginning of the AUTO-MATE shell mode command,
  405.      after the "defun c:auto()" statement in your ACAD.LSP file:
  406.  
  407.           (command "SCRIPT" "C:/AUTOMATE/$dummy$")
  408.  
  409.      "C:/AUTOMATE" in  the  above  line  should  be  changed  to  match  the
  410.      directory in which AUTO-MATE is installed.
  411.           Current users of AUTO-MATE should also note that the default AUTO-
  412.      MATE directory  has  been  changed  from  "C:\ACAD"  to  "C:\AUTOMATE".
  413.      Therefore, if  you have AUTO-MATE installed in the directory "C:\ACAD",
  414.      and whish  to  leave  it there, you  must  now  set  the  environmental
  415.      variable "AMATE"   to   "C:\ACAD"   (IE:   SET   AMATE=C:\ACAD).    The
  416.      environmental variable  is  not  required  if AUTO-MATE is installed in
  417.      "C:\AUTOMATE".
  418.           AUTO-MATE should  now be network  compatible  for  users  who  use
  419.       AutoCAD on a networked system; however, AUTO-MATE has  not  been fully
  420.       tested on such a system.
  421.  
  422.  
  423.  
  424.      SETUP AND CONFIGURATION:
  425.      ________________________
  426.  
  427.           The files  AUTO.BAT,  AUTOMATE.EXE, and AUTOMATE.CFG are needed to
  428.      run AUTO-MATE.   AUTO.BAT  and AUTOMATE.EXE  may  be  copied  into  any
  429.      directory on  your  machine's  DOS  path; however, if  AUTOMATE.CFG  is
  430.      placed in   any   directory   other   than   "C:\AUTOMATE",   then  the
  431.      environmental variable "AMATE" must  be  set  to the directory in which
  432.      AUTOMATE.CFG is placed.  For example, if AUTOMATE.CFG  is  placed  in a
  433.      directory "C:\ACAD\AUTOMATE",  then  "AMATE"  must be set using the DOS
  434.      "SET" command, "SET AMATE=C:\ACAD\AUTOMATE".  This command can be added
  435.      to your  AUTOEXEC.BAT  file,   or   it   can   be  added  to  AUTO.BAT.
  436.           AUTOMATE.CFG contains  the setup information for  running  AutoCAD
  437.      under different  start  up  configurations  and  the configuration data
  438.      necessary to  run  the external programs  supported  by  AUTO-MATE.   A
  439.      typical example of the file follows:
  440.  
  441.           2                        ;Number of AutoCAD configurations
  442.           CONFIGURATION 1          ;Title for first configuration
  443.           SET ACAD=C:\ACAD         ;Config. #1, 'ACAD' variable
  444.           SET ACADCFG=C:\ACAD      ;Config. #1, 'ACADCFG' variable
  445.           CONFIGURATION 2          ;Title for first configuration
  446.           SET ACAD=C:\ACAD         ;Config. #1, 'ACAD' variable
  447.           SET ACADCFG=C:\ACAD\CFG  ;Config. #1, 'ACADCFG' variable
  448.           ARCHIVE                  ;Next line is compress program
  449.           C:\UTILITY\PKZIP.EXE     ;Compress program
  450.           UNARCHIVE                ;Next line is uncompress program
  451.           C:\UTILITY\PKUNZIP.EXE   ;Uncompress program
  452.           LOCATE                   ;Next line is file finder program
  453.           C:\UTILITY\FFF.EXE       ;File finder program
  454.           SHELL                    ;Next line is optional shell program
  455.           C:\UTILITY\[filename.ext];Optional shell program
  456.  
  457.  
  458.  
  459.      A U T O - M A T E  v2.7                                  Page -4-
  460.  
  461.  
  462.  
  463.  
  464.  
  465.           SORT                     ;Next line is selected sort option
  466.           NAME+                    ;Sorts files in ascending order by name
  467.           LOGFILE                  ;Next line is log file
  468.           C:\AUTOMATE\AUTOMATE.LOG ;Specified log file name
  469.  
  470.      The AutoCAD  configuration  settings  may  be changed from within AUTO-
  471.      MATE; however,  all  other  settings   need   to   be  changed  in  the
  472.      AUTOMATE.CFG file using an ASCII text editor or the  included  program,
  473.      AMATECFG.EXE.  Before    AMATECFG.EXE    will    work   properly,   the
  474.      environmental variable "AMATE"  must  be  set  correctly,  or  the file
  475.      AUTOMATE.CFG must be in the directory "C:\AUTOMATE"  (see  above).  The
  476.      compression, and  file finder programs are not included with AUTO-MATE,
  477.      and must be obtained separately.   A list of programs that are known to
  478.      work with AUTO-MATE is included in the sections covering  the "LOCATE",
  479.      and "COMPRESS"  commands.   A more complete description of the optional
  480.      shell program can be found under the "SHELLING TO DOS" section.
  481.  
  482.  
  483.  
  484.      SORTING OPTIONS:
  485.      ________________
  486.  
  487.           Drawing files listed by AUTO-MATE my be sorted in either ascending
  488.      or descending order based on filename,  date,  or  size.  To change the
  489.      sorting option,  simply change the "SORT" parameter  in  the  AUTO-MATE
  490.      configuration file,  AUTOMATE.CFG.   The  following  is a list of valid
  491.      parameters:
  492.  
  493.           NAME+                    ;Sorts files in ascending order by name
  494.           NAME-                    ;Sorts files in descending order by name
  495.           DATE+                    ;Sorts files in ascending order by date
  496.           DATE-                    ;Sorts files in descending order by date
  497.           SIZE+                    ;Sorts files in ascending order by size
  498.           SIZE-                    ;Sorts files in descending order by size
  499.  
  500.  
  501.  
  502.      THE AUTO-MATE LOG FILE:
  503.      _______________________
  504.  
  505.           AUTO-MATE will generate a log  of  activity  within AUTO-MATE if a
  506.      valid DOS filename is entered in the "LOGFILE" parameter  in  the AUTO-
  507.      MATE configuration file, AUTOMATE.CFG.  The following functions/actions
  508.      or recorded in the log file:
  509.  
  510.           Begin AUTO-MATE
  511.           EDIT Drawing
  512.           Begin NEW Drawing
  513.           PLOT
  514.           COPY
  515.           DELETE
  516.           MOVE
  517.           RENAME
  518.           COMPRESS
  519.           ERROR messages
  520.           End AUTO-MATE
  521.  
  522.  
  523.  
  524.  
  525.      A U T O - M A T E  v2.7                                  Page -5-
  526.  
  527.  
  528.  
  529.  
  530.  
  531.      When the  log  option is activated (by entering a valid DOS filename in
  532.      the log file parameter), each time  one  of the above functions/actions
  533.      is executed in AUTO-MATE, AUTO-MATE will write the current  date, time,
  534.      and the  function/action  to  the log file, along with the drawing file
  535.      name if applicable.  A sample log file is included with the program.
  536.  
  537.  
  538.  
  539.      RUNNING ALTERNATE CAD PROGRAMS:
  540.      _______________________________
  541.  
  542.           New to AUTO-MATE is the ability  to  function as a front end for a
  543.      variety of CAD programs other than AutoCAD.  AUTO-MATE should work with
  544.      any CAD program which can automatically load a drawing  file  piped  at
  545.      the command line.  For example:
  546.  
  547.            CAD C:\DRAWINGS\FILE
  548.  
  549.      Where "CAD"  is  the name of the CAD program, and "C:\DRAWINGS\FILE" is
  550.      the complete path\filename (w/o extension) of the drawing file.
  551.           In order to enable the alternate  CAD  program  mode in AUTO-MATE,
  552.      and tell  AUTO-MATE  the  name  of  the executable file  for  your  CAD
  553.      program, you  must use an ASCII text editor (such as EDLIN), and make a
  554.      small change to the file AUTO.BAT.   Simply  add the full path and name
  555.      of your  CAD  executable  file,  preceded  by  a "*",  after  the  word
  556.      "AUTOMATE" in AUTO.BAT.  The following is an example of a AUTO.BAT file
  557.      designed to run Drafix CAD located in a directory named "C:\DFX":
  558.  
  559.           echo off
  560.           automate *C:\DFX\DFX
  561.           if exist c:\automate\$aslect$.bat $aslect$
  562.  
  563.      Where "C:\DFX\DFX"  is  the  complete  path/filename for the Drafix CAD
  564.      executable file.
  565.           Very limited  testing  has   been  done  using  AUTO-MATE  in  the
  566.      alternate CAD  program  mode.  Other than AutoCAD, AUTO-MATE  has  only
  567.      been tested with the following CAD programs:
  568.  
  569.           Drafix CAD
  570.           Graphic CAD
  571.  
  572.      Also note  that  several features available in the normal mode of AUTO-
  573.      MATE are either AutoCAD specific,  or  unavailable in the alternate CAD
  574.      program mode  of  AUTO-MATE.   The following is a list  of  options  or
  575.      commands not available in the alternate CAD program mode of AUTO-MATE:
  576.  
  577.           o The "PLOT" command is not available.
  578.  
  579.           o The "SHELL MODE" is not available.
  580.  
  581.           o The  "CONFIGURE"  command is still available; however, it may or
  582.             may not be very useful, since  it  was  originally designed as a
  583.             way to set the AutoCAD environmental variables  before  entering
  584.             AutoCAD.
  585.  
  586.  
  587.  
  588.  
  589.  
  590.  
  591.      A U T O - M A T E  v2.7                                  Page -6-
  592.  
  593.  
  594.  
  595.  
  596.  
  597.      RUNNING AUTO-MATE WITH SHROOM:
  598.      ______________________________
  599.  
  600.           AUTO-MATE can  now take advantage of SHROOM, included with release
  601.      11 of AutoCAD.  In order to run AUTO-MATE  with SHROOM, you must use an
  602.      ASCII text editor (such as EDLIN) and make a small change  to  the file
  603.      AUTO.BAT.  Simply add "SHROOM [-s paths]" after the word "AUTOMATE " in
  604.      AUTO.BAT. The   "-s   paths"   statement   is  optional.   Consult  the
  605.      documentation included with SHROOM  for more information concerning its
  606.      use.  The following is an example of an AUTO.BAT file  designed to load
  607.      SHROOM:
  608.  
  609.           echo off
  610.           automate SHROOM
  611.           if exist c:\automate\$aslect$.bat $aslect$
  612.  
  613.           You may  also  specify  an  alternate name for ACAD.EXE using this
  614.      option.  The default name that AUTO-MATE uses to run AutoCAD is "ACAD";
  615.      however, if for some reason you wish  to  specify the full path to your
  616.      AutoCAD executible  file,  you  may  enter it after "AUTOMATE"  in  the
  617.      AUTO.BAT file.   The  following  is  an  example  of  an  AUTO.BAT file
  618.      illustrating this option:
  619.  
  620.           echo off
  621.           automate C:\AUTOCAD\ACAD
  622.           if exist c:\automate\$aslect$.bat $aslect$
  623.  
  624.      Where "C:\AUTOCAD\ACAD" is the  full  path  and  name  of  the  AutoCAD
  625.      executible file.
  626.  
  627.  
  628.  
  629.      AUTOMATIC INSTALLATION:
  630.      _______________________
  631.  
  632.           In order  to  simplify the installation process,  an  installation
  633.      program, INSTALL.EXE,   has   been   included.    When   executed,  the
  634.      installation program will prompt  you for all the information necessary
  635.      to install AUTO-MATE on your system, and optionally  copy  the required
  636.      files from a distribution disk to the directory of your choice.  If the
  637.      directory that  you enter does not exist, the installation program will
  638.      create it (if possible). The installation  program also asks you if you
  639.      want to modify your AUTOEXEC.BAT file to include the commands necessary
  640.      for AUTO-MATE to function properly.  This includes adding the directory
  641.      you have  chosen  to  install AUTO-MATE on to the "PATH"  command,  and
  642.      adding the  "SET  AMATE="  command.   Please note, however, that if the
  643.      intended directory is already in  your AUTOEXEC.BAT "PATH" command, you
  644.      should answer  "no"  to  the  installation  program's   "PATH"  prompt.
  645.      Additionally, the  "SET  AMATE="  command  is  not  needed  if  you are
  646.      installing AUTO-MATE to the directory "C:\AUTOMATE".
  647.           The installation program also  makes  a  small  change to the file
  648.      AUTO.BAT if  you  are  installing AUTO-MATE to a directory  other  than
  649.      "C:\AUTOMATE".  If  you  do not use the automatic installation program,
  650.      you must manually make this change  using  an  ASCII  text editor.  The
  651.      line in the file AUTO.BAT that must be changed reads:
  652.  
  653.           if exist C:\AUTOMATE\$aslect$.bat $aslect$
  654.  
  655.  
  656.  
  657.      A U T O - M A T E  v2.7                                  Page -7-
  658.  
  659.  
  660.  
  661.  
  662.  
  663.      You must  change "C:\AUTOMATE" to the name of the drive\directory where
  664.      you have installed AUTO-MATE.
  665.           If you wish to use AUTO-MATE as a shell from AutoCAD, you may have
  666.      the install program add the necessary  commands  to  your  ACAD.LSP and
  667.      ACAD.PGP files.  Once configured properly, the shell  option will allow
  668.      you to  run  AUTO-MATE as a shell from AutoCAD without actually exiting
  669.      AutoCAD each time you change drawing  files.   However,  in the current
  670.      version of  AUTO-MATE,  you  are  not  able  to  change   the   AutoCAD
  671.      configuration via the [/] key.  Additionally, compressed (.ZWG) drawing
  672.      files that  are edited will not be re-compressed after they are quit or
  673.      ended.  Also included in the installation  program is the option to add
  674.      the AutoCAD commands "Q" (Complete Quit) and "E" (Complete End) to your
  675.      ACAD.LSP file.   If  this  option  is selected, then  the  installation
  676.      program will  create  two  small  AutoCAD  script files in your AutoCAD
  677.      directory ($QUIT$.SCR and $END$.SCR), and add the LISP commands "Q" and
  678.      "E" to your ACAD.LSP file.  The commands  "Q"  and "E" simply allow you
  679.      to completely exit AutoCAD and return to AUTO-MATE  without  having  to
  680.      enter a "0" at the AutoCAD main menu screen after ending or quitting an
  681.      AutoCAD drawing.
  682.  
  683.      NOTE: You  should  always  make  backup  copies  of  your AUTOEXEC.BAT,
  684.            ACAD.LSP, and  ACAD.PGP  files   before  using  the  installation
  685.            program.
  686.  
  687.  
  688.  
  689.      RUNNING AUTO-MATE:
  690.      __________________
  691.  
  692.           AUTO-MATE is  extremely simple to use.  Simply  follow  the  above
  693.      installation procedure  and  re-boot  your computer if any changes were
  694.      made to your AUTOEXEC.BAT file.   To  run  AUTO-MATE simply type "AUTO"
  695.      and press [Enter].  The program will open with a title  screen,  then a
  696.      listing of  all  drawing  files  and  sub-directories under the current
  697.      directory will be displayed.  Use  the  cursor  keys  to  highlight the
  698.      different drawing files or directories.  If more than  15 drawing files
  699.      and sub-directories  exist  in the current directory, the remaining may
  700.      be accessed by continuing to cursor  down  once  you  have  reached the
  701.      bottom of the display list.
  702.           Pertinent disk information is displayed in a box  to  the right of
  703.      the screen  which  includes  the  current  drive,  directory, number of
  704.      drawing files,  free  space on the  current  drive,  and  the  selected
  705.      configuration (if any).
  706.  
  707.  
  708.  
  709.      MOUSE CONVENTIONS:
  710.      __________________
  711.  
  712.           AUTO-MATE supports  a Microsoft compatible two-button  mouse,  and
  713.      all AUTO-MATE  commands  may  be  accessed  using  a  mouse.  AUTO-MATE
  714.      commands are accessed with the mouse by positioning the mouse cursor on
  715.      the desired command in the lower portion of the screen and pressing the
  716.      left mouse button.  You may also  edit  a drawing or change directories
  717.      by positioning  the mouse cursor on the desired drawing  file  or  sub-
  718.      directory and pressing the left mouse button.  You may simply highlight
  719.      a drawing  file or sub-directory by positioning the mouse cursor on the
  720.      drawing file  or  sub-directory   and   pressing   the   right  button.
  721.  
  722.  
  723.      A U T O - M A T E  v2.7                                  Page -8-
  724.  
  725.  
  726.  
  727.  
  728.  
  729.      Positioning the mouse cursor on a highlighted drawing file and pressing
  730.      the right  mouse  button will also tag or untag the highlighted drawing
  731.      file depending on the file's current  tag  status.   Additionally,  the
  732.      mouse may  be  used to answer "yes" or "no" at all applicable  prompts.
  733.      The left  mouse  button  represents  "yes",  and the right mouse button
  734.      represents "no".   Pressing either  mouse  button  also  satisfies  the
  735.      "Press any key" prompt.
  736.           In order to use the mouse to scroll through the  current directory
  737.      listing, you  may  use  the  mouse bar located to the right of the file
  738.      display area.   Positioning the  mouse  somewhere  along  the  bar  and
  739.      pressing the left mouse button will move the file display  window to an
  740.      area in the directory listing proportional to the location of the mouse
  741.      cursor on  the  mouse  bar.  You may also step up or down the directory
  742.      listing by positioning the mouse  cursor over either the "up" or "down"
  743.      arrows at  either  end  of the mouse bar and pressing  the  left  mouse
  744.      button.
  745.  
  746.  
  747.  
  748.      USING AUTO-MATE IN SHELL MODE:
  749.      ______________________________
  750.  
  751.           AUTO-MATE may  also  be  run  as  a  shell  from AutoCAD; however,
  752.      certain changes must be made to  your  ACAD.PGP  file and your ACAD.LSP
  753.      files.  The required changes are listed below and may  be made manually
  754.      or by the included AUTO-MATE installation program.
  755.  
  756.           ACAD.PGP:
  757.           ---------
  758.              Add The following line to your ACAD.PGP file:
  759.  
  760.              "AMATE,AUTOMATE S,240000,,0"
  761.  
  762.           ACAD.LSP:
  763.           ---------
  764.              Add the following lines to your ACAD.LSP file:
  765.  
  766.              "(defun c:AUTO ()
  767.                  (command "SCRIPT" "C:/AUTOMATE/$DUMMY$")
  768.                  (setq ans (getstring "\nSave current drawing [Y/n]? "))
  769.                  (if (and (/= ans "n")(/= ans "N"))
  770.                     (command "save" "")
  771.                  )
  772.                  (command "AMATE")
  773.                  (command "SCRIPT" "C:/AUTOMATE/$AUTO$")
  774.               )"
  775.  
  776.      NOTE: "C:/AUTOMATE/$AUTO$"   and  "C:/AUTOMATE/$DUMMY$"  in  the  above
  777.            AutoLISP routine should be  modified  to match the directory that
  778.            you installed AUTO-MATE in.  If the installation program is used,
  779.            this is taken care of automatically.
  780.  
  781.      Once the  above additions have been made to the ACAD.PGP  and  ACAD.LSP
  782.      files, the  shell  version of AUTO-MATE may be invoked at any time from
  783.      the AutoCAD editor by typing "AUTO" and pressing [Enter].
  784.           Please note that the limitations  mentioned  under  the "AUTOMATIC
  785.      INSTALLATION" section apply to the shell mode of AUTO-MATE.
  786.  
  787.  
  788.  
  789.      A U T O - M A T E  v2.7                                  Page -9-
  790.  
  791.  
  792.  
  793.  
  794.  
  795.      RUNNING AUTOCAD:
  796.      ________________
  797.  
  798.           To run  AutoCAD  with  the  highlighted drawing file, simply press
  799.      [Enter].  AutoCAD  will  run,  and   the  selected  drawing  file  will
  800.      automatically be  loaded.   Once  the  drawing is ended  or  quit,  and
  801.      AutoCAD is  exited,  AUTO-MATE  will  automatically  run  again. To run
  802.      AutoCAD without a selected drawing  file  (begin  a new drawing), press
  803.      the space bar at anytime.  AUTO-MATE will then prompt you for a drawing
  804.      name.  You may enter up to 44 characters for the name  at this point if
  805.      you choose  which  could  include 8 characters for the drawing name and
  806.      any AutoCAD "template" drawing (see AutoCAD), or you may leave the name
  807.      blank by simply pressing [Enter] and then enter the name in the AutoCAD
  808.      main menu screen.
  809.  
  810.  
  811.  
  812.      PLOTTING A DRAWING:
  813.      ___________________
  814.  
  815.           The AUTO-MATE "plot" command  loads  AutoCAD  with the highlighted
  816.      file and selects either option [3]( - Plot) or [4]( -Printer Plot) from
  817.      the AutoCAD  main menu screen.  To plot the highlighted  drawing  file,
  818.      press "P",  and  AUTO-MATE  will  ask you if you want a 'Pen plot' or a
  819.      'Printer plot'.  If you select a  'Pen  Plot',  you  will also have the
  820.      option of specifying certain AutoCAD plot parameters.   AUTO-MATE  will
  821.      automatically send  the parameters entered in the "Plot Info" window to
  822.      AutoCAD, and  exit AutoCAD after  the  plot  is  completed.   The  plot
  823.      parameters entered for a particular AutoCAD drawing  file  in AUTO-MATE
  824.      are stored  in  the DWG-INFO.TXT file (see "ADDING FILE DESCRIPTIONS").
  825.      Therefore, those parameters will  remain  available for that particular
  826.      drawing if  it  is  renamed,  moved,  or  copied  using  the  AUTO-MATE
  827.      "RENAME', "MOVE", or "COPY" commands.
  828.           All of  the  parameters listed in the AUTO-MATE "Plot Info" window
  829.      except the  "Additional  Command"   parameter  correspond  directly  to
  830.      AutoCAD plot  parameters, and are discussed in detail  in  the  AutoCAD
  831.      Reference Manual.   The  "Additional  Command" parameter is included to
  832.      continue after interruptions in  the  plot  sequence  such as the "Plot
  833.      exceeds specified  size"  error.  A "Y" placed in this  parameter  will
  834.      enable the   plot   to   continue   in   this  situation.   Under  most
  835.      circumstances, you should leave this  parameter  blank.  All other plot
  836.      parameters may  also be left blank, in which case the  default  AutoCAD
  837.      plot parameter  will  be  used.  The "Plot file" parameter is only used
  838.      when the drawing is being plotted to a file.
  839.  
  840.  
  841.  
  842.      AUTOCAD CONFIGURATIONS:
  843.      _______________________
  844.  
  845.           Several different AutoCAD configurations  may be created and saved
  846.      using AutoCAD, as long as each configuration was created and saved in a
  847.      unique directory.  AUTO-MATE has a feature which lets  you  change  the
  848.      current AutoCAD   configuration   to  one  previously  created  through
  849.      AutoCAD.  To enable this feature, press the foward-slash [/] key, and a
  850.      list of current configurations  will  appear.   to  change  the current
  851.      AutoCAD configuration,  highlight the desired configuration  and  press
  852.      [Enter].
  853.  
  854.  
  855.      A U T O - M A T E  v2.7                                  Page -10-
  856.  
  857.  
  858.  
  859.  
  860.  
  861.           AUTO-MATE comes  with  two example configurations which are stored
  862.      in the AUTOMATE.CFG file; however,  these  will not work on your system
  863.      unless you have previously set these configurations using AutoCAD.
  864.           To add a new configuration, press the [A] key.  A window will then
  865.      appear prompting  you for the name of the new configuration  name,  and
  866.      two configuration command lines (for setting "ACAD" and "ACADCFG"). The
  867.      environmental variable  "ACAD" will usually need to be set equal to the
  868.      path under which your AutoCAD program  files  reside.   This is usually
  869.      "C:\ACAD".  The variable "ACADCFG" is set to the path where the AutoCAD
  870.      configuration files are kept.  If you are creating a new configuration,
  871.      you will have to select the new configuration by pressing  [Enter] once
  872.      you have  entered  it  into  AUTO-MATE, and then press the space bar to
  873.      execute AutoCAD.  AutoCAD will tell  you  that AutoCAD has not yet been
  874.      configured, and   then  prompt  you  for  the  required   configuration
  875.      information. (Consult   your   AutoCAD   Reference   Manual   for  more
  876.      information on AutoCAD configurations).
  877.           When adding a new AutoCAD configuration, you must first create the
  878.      necessary DOS  directory  that  you  wish  to  place  the  new  AutoCAD
  879.      configuration files  in.  AUTO-MATE does not create  the  configuration
  880.      information for   AutoCAD,   nor  does  it  create  the  necessary  DOS
  881.      directories.  AUTO-MATE  simply   sets   the   required   environmental
  882.      variables which "point" to the pre-defined configurations.
  883.           Once the foward-slash [/] key has been pressed,  the user also has
  884.      the option of deleting or editing an existing configuration.
  885.  
  886.  
  887.  
  888.      MOVING AROUND INSIDE AUTO-MATE:
  889.      _______________________________
  890.  
  891.           Once inside AUTO-MATE, there are two ways in which you can move to
  892.      different directories.   If  you  wish to change the current drive, you
  893.      must press [G] and type in the new  drive  specification at the prompt.
  894.      You may  also  type in a complete drive and path specification  at  the
  895.      prompt.
  896.           You may move around through the directory structure on the current
  897.      drive by  highlighting the new directory in the file listing window and
  898.      pressing [Enter].  Directories are indicated in the file display window
  899.      by a "<DIR>" at the end of the directory name.  In order to "step back"
  900.      one directory simply highlight the ".." listing and press [Enter]. This
  901.      has the same affect as typing "cd .." at the DOS prompt.
  902.  
  903.  
  904.  
  905.      ADDING FILE DESCRIPTIONS:
  906.      _________________________
  907.  
  908.           A description of up to two lines  may be added to any drawing file
  909.      or sub-directory  displayed by AUTO-MATE.  To add a  description  to  a
  910.      file or  sub-directory,  simply  highlight  the  desired  file  or sub-
  911.      directory and press [E].  A cursor  will appear in the file description
  912.      area near  the  bottom  of  the screen.  You may then  simply  type  an
  913.      appropriate description  in.  Pressing [Enter] terminates and saves the
  914.      description while pressing the  [Esc]  key  exits  without  saving  any
  915.      changes that  have  been  made  to  the  file  description.    Once   a
  916.      description has   been   entered  for  a  file  or  sub-directory,  the
  917.      description will be displayed whenever  the  file  or  sub-directory is
  918.      highlighted.
  919.  
  920.  
  921.      A U T O - M A T E  v2.7                                  Page -11-
  922.  
  923.  
  924.  
  925.  
  926.  
  927.           When a  description  is  added in AUTO-MATE, the program creates a
  928.      file in the current directory named DWG-INFO.TXT if one has not already
  929.      been created.  This file stores  all  of  the  file  and  sub-directory
  930.      descriptions for the current directory, and is automatically updated as
  931.      new descriptions are added.  When a drawing file is  renamed, moved, or
  932.      copied using  the  AUTO-MATE  "RENAME", "MOVE", or "COPY" commands, the
  933.      file description stays with the  new  file.   For example, if a file is
  934.      moved from   a  directory  named  "c:\files"  to  a   directory   named
  935.      "c:\drawings" using the AUTO-MATE "MOVE" command, the DWG-INFO.TXT file
  936.      in the   directory  "c:\drawings"  would  be  updated  to  include  the
  937.      description for  the  file  being  moved  into  that  directory.   More
  938.      information about manipulating files can be found under  the  following
  939.      sections.
  940.  
  941.      NOTE: DWG-INFO.TXT  files  created  with versions of AUTO-MATE prior to
  942.            version 1.20 are not compatible with the newer version.  In order
  943.            to use your existing DWG-INFO.TXT  files,  you  must use an ASCII
  944.            text editor to add a " DWG" to the end of each  drawing file name
  945.            in the  DWG-INFO.TXT  file.  Also, file descriptions created with
  946.            versions of AUTO-MATE prior  to  version 2.0 will be truncated at
  947.            78 characters.
  948.  
  949.  
  950.  
  951.      PRINTER OUTPUT:
  952.      _______________
  953.  
  954.           The drawing  file descriptions for the current  directory  may  be
  955.      printed by  pressing  [I].   The  printout will be formatted in 66 line
  956.      pages with the page number for each page along with the total number of
  957.      pages in the printout printed in  the  upper-right corner of each page.
  958.      All drawing files and sub-directories listed in the  current  directory
  959.      will be  included  in  the  printout, regardless of whether or not they
  960.      have a description.  Printer output  defaults  to "LPT1:"; however, you
  961.      may also direct the printer to a ASCII text file by changing "LPT1:" to
  962.      a valid DOS filename.
  963.  
  964.  
  965.  
  966.      RENAMING DRAWING FILES:
  967.      _______________________
  968.  
  969.           AUTO-MATE includes  a  function  for renaming a  selected  drawing
  970.      file, while maintaining that file's AUTO-MATE description.  To rename a
  971.      drawing file,  highlight  the  desired  file  and press [R], and at the
  972.      prompt, type in the new file name.   The  file  name  must  be  a valid
  973.      AutoCAD drawing file name, and the file extension  (".DWG"  or  ".ZWG")
  974.      should not  be added.  Once the file has been renamed, the DWG-INFO.TXT
  975.      file is updated automatically.
  976.           When a compressed file is selected  to  be renamed, AUTO-MATE will
  977.      uncompress the  file and rename the uncompressed version  of  the  file
  978.      also.
  979.  
  980.  
  981.  
  982.  
  983.  
  984.  
  985.  
  986.  
  987.      A U T O - M A T E  v2.7                                  Page -12-
  988.  
  989.  
  990.  
  991.  
  992.  
  993.      TAGGING DRAWING FILES:
  994.      ______________________
  995.  
  996.           To tag  a  highlighted  drawing  file, simply press [T]. A "check-
  997.      mark" will be displayed to the left  of  the  drawing  file to indicate
  998.      that the file is tagged.  The current number of tagged files along with
  999.      the current size of the tagged files is displayed at  the bottom of the
  1000.      file display window.
  1001.  
  1002.  
  1003.  
  1004.      MOVING DRAWING FILES:
  1005.      _____________________
  1006.  
  1007.           The AUTO-MATE  "MOVE"  command  enables a selected drawing file or
  1008.      group of tagged drawing files to be moved from the current directory to
  1009.      any valid directory on the your system.   To move a highlighted drawing
  1010.      file, or a group of tagged files press [M].  A prompt will be displayed
  1011.      asking for  the  new  directory.   The complete DOS  path  to  the  new
  1012.      directory must  be  entered  at  the  prompt.  Once this has been done,
  1013.      press [Enter] and the selected file(s)  will  be  moved to the selected
  1014.      drive/directory.  The  file  description associated  with  the  file(s)
  1015.      being moved will also be moved to the new directory.
  1016.  
  1017.  
  1018.  
  1019.      DELETING DRAWING FILES:
  1020.      _______________________
  1021.  
  1022.           To delete  a  highlighted  drawing file or group of tagged drawing
  1023.      files press [D].  A prompt will appear  asking  you to confirm that the
  1024.      highlighted or tagged file(s) is to be deleted.  You must answer "y" in
  1025.      order for the file(s) to be deleted.  Once a file is  deleted, any file
  1026.      description associated  with  that  file is also removed from the "DWG-
  1027.      INFO.TXT" file.
  1028.  
  1029.  
  1030.  
  1031.      COPYING DRAWING FILES:
  1032.      ______________________
  1033.  
  1034.           The AUTO-MATE  "COPY"  command   works  exactly  like  the  "MOVE"
  1035.      command, only  the  selected  file(s)  will  not be  deleted  from  the
  1036.      original directory.
  1037.  
  1038.  
  1039.  
  1040.      COMPRESSING DRAWING FILES:
  1041.      __________________________
  1042.  
  1043.           AUTO-MATE is  capable  of  using  one  of  the many available file
  1044.      compression programs  to compress  or  uncompress  drawing  files.   To
  1045.      activate the  file  compression program, press [Z].   Once  compressed,
  1046.      drawing files  typically  take  up  about half the amount of disk space
  1047.      that they normally would.  AUTO-MATE  renames  the  compressed  drawing
  1048.      file to "filename.ZWG", and deletes the original drawing  file.  If for
  1049.      some reason,  the compressed file cannot be created, AUTO-MATE will NOT
  1050.      delete the original drawing file.   If  compression  is  requested on a
  1051.  
  1052.  
  1053.      A U T O - M A T E  v2.7                                  Page -13-
  1054.  
  1055.  
  1056.  
  1057.  
  1058.  
  1059.      drawing file  that  has already been compressed, that drawing file will
  1060.      be uncompressed, and renamed to "filename.DWG", and the compressed file
  1061.      will be deleted.
  1062.           Multiple compressions of tagged  drawing  files are also possible.
  1063.      Simply tag the drawing files you wish to compress and press [C].  AUTO-
  1064.      MATE will  use  the  file  compression program to compress  all  tagged
  1065.      drawing files  with  the  "DWG"  extension,  and  uncompress all tagged
  1066.      drawing files with the "ZWG" extension.
  1067.           A compressed file can still  be  loaded into AutoCAD through AUTO-
  1068.      MATE.  AUTO-MATE will use the file compression program to automatically
  1069.      uncompress the drawing file before running AutoCAD, and once AutoCAD is
  1070.      exited, the drawing file will be automatically re-compressed.
  1071.           The following  is  a list of file compression  programs  that  are
  1072.      known to  work  with  AUTO-MATE,  along  with the settings that must be
  1073.      included in the AUTOMATE.CFG file:
  1074.  
  1075.           PKZIP                            PAK
  1076.           by PKWARE, Inc.                  by NOGATE CONSULTING
  1077.           ---------------                  --------------------
  1078.           ARCHIVE                          ARCHIVE
  1079.           [drive:][path]PKZIP              [drive:][path]PAK A
  1080.           UNARCHIVE                        UNARCHIVE
  1081.           [drive:][path]PKUNZIP            [drive:][path]PAK E
  1082.  
  1083.  
  1084.           PKARC                            ZOO
  1085.           by PKWARE, Inc.                  by Rahul Dhesi
  1086.           ---------------                  --------------
  1087.           ARCHIVE                          ARCHIVE
  1088.           [drive:][path]PKARC              [drive:][path]ZOO A
  1089.           UNARCHIVE                        UNARCHIVE
  1090.           [drive:][path]PKXARC             [drive:][path]ZOO E
  1091.  
  1092.           LHAR
  1093.           by Haruyasu Yoshizaki
  1094.           ---------------------
  1095.           ARCHIVE
  1096.           [drive:][path]LHARC A
  1097.           UNARCHIVE
  1098.           [drive:][path]LHARC A
  1099.  
  1100.      NOTE: [drive:] and [path] are not  required if the compression programs
  1101.            are located in a directory on your system's DOS path.
  1102.  
  1103.  
  1104.  
  1105.      LOCATING A DRAWING FILE:
  1106.      ________________________
  1107.  
  1108.           To locate a specified drawing file using an external  file  finder
  1109.      program, press  [L],  and  enter  the  desired  filespec at the prompt.
  1110.      AUTO-MATE will  run  the  file   finder   program   specified   in  the
  1111.      AUTOMATE.CFG file under the "LOCATE" heading.
  1112.           The following is a list of file finder programs  that are known to
  1113.      work with  AUTO-MATE,  along with the settings that must be included in
  1114.      the AUTO-MATE.CFG file:
  1115.  
  1116.  
  1117.  
  1118.  
  1119.      A U T O - M A T E  v2.7                                  Page -14-
  1120.  
  1121.  
  1122.  
  1123.  
  1124.  
  1125.           Fullscreen File Finder           PKFIND
  1126.           by Jim Derr                      by PKWARE, Inc.
  1127.           ----------------------           ---------------
  1128.           LOCATE                           LOCATE
  1129.           [drive:][path]FFF                [drive:][path]PKFIND
  1130.  
  1131.      NOTE: [drive:]  and  [path] are not required if the file finder program
  1132.            is located in a directory on your system's DOS path.
  1133.  
  1134.  
  1135.  
  1136.      SHELLING TO DOS:
  1137.      ________________
  1138.  
  1139.           To temporally shell to DOS,  press  [S],  and  DOS commands may be
  1140.      entered.  To return to AUTO-MATE, type 'EXIT' and press  [Enter] at the
  1141.      DOS prompt.
  1142.           Optionally, a  shell  program  may be included in the AUTOMATE.CFG
  1143.      file.  If the name of an optional  shell  program  is  found, AUTO-MATE
  1144.      will run that program with the highlighted drawing  file  piped  to the
  1145.      optional shell  program  instead  of  performing  the normal DOS shell.
  1146.      This option is mainly intended for  users  who  wish to use an external
  1147.      file viewer  with  AUTO-MATE,  but is not limited  to  that  use.   The
  1148.      optional shell  program  can  be  ay  program  that  uses the following
  1149.      format:
  1150.  
  1151.           PROGRAM (options) FILENAME.EXT
  1152.  
  1153.      Where "PROGRAM  (options)"  is   the   optional   shell   program,  and
  1154.      "FILENAME.EXT" is the highlighted drawing file that  is  piped  to  the
  1155.      optional shell program.  If the highlighted drawing file is compressed,
  1156.      AUTO-MATE will  uncompress the drawing file before running the optional
  1157.      shell program, and then re-compress  the file before returning from the
  1158.      shell program.
  1159.           This option has not been tested extensively, and caution should be
  1160.      exercised with its use.
  1161.  
  1162.  
  1163.  
  1164.      EXITING AUTO-MATE:
  1165.      __________________
  1166.  
  1167.           To exit AUTO-MATE press [Esc].  AUTO-MATE will  exit to DOS in the
  1168.      current directory,  or alternately run the next command in the AUTO.BAT
  1169.      batch file.
  1170.  
  1171.  
  1172.  
  1173.  
  1174.  
  1175.  
  1176.  
  1177.  
  1178.  
  1179.  
  1180.  
  1181.  
  1182.  
  1183.  
  1184.  
  1185.      A U T O - M A T E  v2.7                                  Page -15-
  1186.  
  1187.  
  1188.  
  1189.  
  1190.  
  1191.      SAMPLE INSTALLATION SETUPS:
  1192.      ___________________________
  1193.  
  1194.           The following is a list of sample installation setups of AUTO-MATE
  1195.      for users who are having difficulty installing the program.
  1196.  
  1197.  
  1198.           EXAMPLE #1: AUTO-MATE being installed in "C:\AUTOMATE"
  1199.           ------------------------------------------------------
  1200.           1. Copy  AUTOMATE.EXE,  AUTO.BAT,   AUTOMATE.CFG   and  optionally
  1201.              AMATECFG.EXE to the directory "C:\AUTOMATE".
  1202.  
  1203.           2. Make sure that the directory "C:\AUTOMATE" is  included in your
  1204.              AUTOEXEC.BAT's "PATH" command.
  1205.  
  1206.           3. Reboot  your  system  if  necessary, and type "AUTO" at the DOS
  1207.              prompt to execute AUTO-MATE
  1208.  
  1209.  
  1210.           EXAMPLE #2: AUTO-MATE being installed in "C:\ACAD\AUTOMATE"
  1211.           -----------------------------------------------------------
  1212.           1. Copy  AUTOMATE.EXE,  AUTO.BAT,  AUTOMATE.CFG   and   optionally
  1213.              AMATECFG.EXE to the directory "C:\ACAD\AUTOMATE".
  1214.  
  1215.           2. Change the line in the file AUTO.BAT which reads:
  1216.                 "if exist C:\AUTOMATE\$aslect$.bat $aslect$"
  1217.              to read:
  1218.                 "if exist C:\ACAD\AUTOMATE\$aslect$.bat $aslect$"
  1219.  
  1220.           3. Add  the  directory  "C:\ACAD\AUTOMATE"  to your AUTOEXEC.BAT's
  1221.              "PATH" command.
  1222.  
  1223.           4. Add   the   command  "SET   AMATE=C:\ACAD\AUTOMATE"   to   your
  1224.              AUTOEXEC.BAT file.
  1225.  
  1226.           5. Reboot your system if necessary, and type  "AUTO"  at  the  DOS
  1227.              prompt to execute AUTO-MATE
  1228.  
  1229.  
  1230.  
  1231.  
  1232.  
  1233.  
  1234.  
  1235.  
  1236.  
  1237.  
  1238.  
  1239.  
  1240.  
  1241.  
  1242.  
  1243.  
  1244.  
  1245.  
  1246.  
  1247.  
  1248.  
  1249.  
  1250.  
  1251.      A U T O - M A T E  v2.7                                  Page -16-
  1252.  
  1253.  
  1254.  
  1255.  
  1256.  
  1257.                         ORDER FORM FOR AUTO-MATE v2.7
  1258.                         _____________________________
  1259.  
  1260.                            Copyright (c) 1990-1992
  1261.                                - Mate Software
  1262.                            Fayetteville, Arkansas
  1263.  
  1264.  
  1265.  
  1266.      NAME:______________________________________________________________    
  1267.  
  1268.      COMPANY:___________________________________________________________    
  1269.  
  1270.      ADDRESS:___________________________________________________________    
  1271.  
  1272.      CITY, STATE:____________________________________ZIP:_______________
  1273.  
  1274.      PHONE:_____________________________________________________________    
  1275.  
  1276.      -------------------------------------------------------------------    
  1277.  
  1278.      *USER SURVEY*
  1279.  
  1280.      COMPUTER TYPE:_____________________________________________________
  1281.  
  1282.      DOS VERSION:_______________________________________________________
  1283.  
  1284.      AUTOCAD VERSION:___________________________________________________
  1285.  
  1286.      BBS WHERE YOU OBTAINED AUTO-MATE (INCLUDE PHONE NUMBER):
  1287.  
  1288.      ___________________________________________________________________
  1289.  
  1290.      COMMENTS:
  1291.  
  1292.  
  1293.  
  1294.      -------------------------------------------------------------------    
  1295.  
  1296.      *CHECK DESIRED REGISTRATION*
  1297.  
  1298.      LATEST VERSION OF AUTO-MATE:                          $25.00 ______
  1299.          (INCLUDES MANUAL AND REGISTERED VERSION
  1300.           OF AUTO-MATE ON DISK)
  1301.  
  1302.      SITE LICENSE:                                         $70.00 ______
  1303.          (REQUIRED FOR BUSINESS - INCLUDES MANUAL
  1304.           AND SITE LICENSED VERSION OF AUTO-MATE
  1305.           ON DISK)
  1306.  
  1307.      UPGRADE FROM EARLIER VERSION OF AUTOMATE:              $5.00 ______
  1308.          (MUST INCLUDE SERIAL NUMBER)
  1309.          SERIAL NUMBER:_______________________
  1310.  
  1311.  
  1312.      SEND TO:           KURTIS J. JONES
  1313.                         1748 NORTH OAKLAND
  1314.                         FAYETTEVILLE, ARKANSAS   72703
  1315.  
  1316.  
  1317.      A U T O - M A T E  v2.7                                  Page -17-
  1318.  
  1319.  
  1320.  
  1321.